Installation Menu

The signal quality and the scan progress are indicated during the scan.

The message

Scan completed

Press [OK] button

appears at the end of the scan. All new channels are added to the existing channel list.

The scan does not include analogue channels.

You can interrupt the search scan by pressing the Lbutton.

TP setup/scan

In this menu you can scan through the transponders for specific channels, e.g. when new channels are offered in the package of a specific broadcaster. You can obtain this information from the corresponding video text or TV and satellite magazines. You can choose between "analogue" and "digital".

Digital transponder

The following settings are possible in the "digital" submenu (select positions with

ou):

Required satellite with -or +

the frequency of the transponder with number buttons,

the polarization with -or +button,

the symbol rate with number buttons and

scan mode for freely receivable or free-to-air and unscrambled channels.

The bar diagram indicates the signal strength.

Start the scan by pressing Oin the "scan" position.

You will now see the message:

Scan active

Press L-button to cancel

If the scan is successful you will see the message

Success

If the scan is unsuccessful

Error

39

Page 39
Image 39
Kathrein UFD 545 manual TP setup/scan, Scan completed Press OK button