Password
You can prevent your satellite receiver being used by unauthorized persons by means of a password. In this way, you can ensure your reception settings are not changed by other persons. At the same time, you can activate the parental control function to lock out various channels.
Keep your password in a safe place so that you always have access to your channels should you ever forget it.
Factory setting
The password protection function is inactive in the factory setting.
Entering a password
Call up the main menu by pressing the Mbutton:
In this menu, press the oubuttons to select "system parameters" and
confirm by pressing O.
Now press the oubuttons to select the "parental control" function and
confirm by pressing O. You may be asked to enter a password.
You can carry out the following settings in this
Age limit: This setting is only effective if the corresponding
Lock list: Yes/No. With this option you can lock or unlock the editing function for channel lists.
Lock installation: Yes/No. With this option you can lock or grant access to the installation menu.
Enter new password: Here you can enter your (new) password with the aid of the number buttons.
Confirm password: Here you enter your (new) password once again with the number buttons to serve as a confirmation.
Personal: Here, enter the receiver identification which the receiver displays when switched on. This may be a useful function to recognize the receiver in the case of theft. See section "Notes on operation" for information on how to use the number buttons on the remote control for alphanumeric entries. The factory setting is "UFD 545".
You have now completed all settings for securing and identifying your satellite receiver.
30
