Connection examples, Connection arrangement | Kathrein UFD 545

Technical Reference

Connection examples

Connection arrangement 1:

	R
	Universal LNB
	UAS 177
			External jumper for
			analogue reception
Receiver		Sat-IF
UFD 545
		IF INPUT DIGITAL	IF INPUT
			IF INPUT	UFD 545
		14/18V max.400mA	ANALOG	UFD 545
AUDIO	VIDEO	22kHz	950-2150MHz
AUDIO	VIDEO
L			Elektroschock-Gefahr !
			Elektroschock-Gefahr !
	VCR	DATA I/O	Nicht oeffnen!
	AUX	IF OUTPUT
R		IF OUTPUT
R
			50/60Hz	12V-24V	Scart
			50/60Hz	max.3A
			max.30W
	Cinch
		TV
VHF/UHF	Scart
	Scart
VCR
	VHF/UHF				HiFi

Connection of the DVB-S receiver to a TV set, a VCR and a HiFi system for receiving and recording digital satellite TV and radio channels.

The connection requires two SCART cables and one Cinch cable. If your TV is equipped for stereo, the stereo sound can also be reproduced via the stereo speakers of your TV set.

Video playback takes place via the modulator of the VCR and the antenna input of the TV set.

53

Image 53

Kathrein UFD 545 manual Connection examples, Connection arrangement

Contents

DVB Satellite Receiver Page Important information Foreword Contents Timer Settings Sound Settings Glossary, Abbreviations Glossary of Technical Terms Safety Information Ventilation Setting-up locationMoisture, sunlight, heat Mains voltage Rear view Controls, Indicators, Displays and ConnectionsFront view Channel Remote control function buttons Receiver on the command set Switching over between Remote Control Command Sets Alphanumeric entries Menu conceptButton functions Language selection OSD Connection and Startup Presetting of the receiving systemTo connect the receiver Sat-IF connection LNB supply voltage Inserting batteries in the remote controlModulator connection TV and video recorder connection First steps Switching on for the First TimeFactory setting of the receiver Important on-screen displays OSD On-Screen Displays Reception status digital Channel selectionSelecting a TV channel Reception status analogue Switching over to radio channel Selecting a radio channel by number entry Timer Settings Setting the volume Sound SettingsStereo and two-channel sound reproduction Mute Favourite channels Channel Lists TV/radioSelecting TV and radio channels last received To delete a channel To sort the channels To add a channel Analogue channel lists To add an analogue channel Adding/Removing Satellites To set up satellites To remove satellites To enter a satellite name Current Channel Overview This function cannot be selected in analogue mode Entering a password PasswordFactory setting Parental control Operation in exceptional cases Operation from the Front Panel Local time/timer Setting System ParametersSystem parameters Parental control Summer time Timer menuTV type Picture format Mod.Ch Mod.typOSD colour OSD-Trans LNB configuration Installation Menu Changing the oscillator frequency Satellite scan Antenna settings Scan completed Press OK button TP setup/scan Analogue transponder KHz signal DiSEqC UFO setup Tone burst Preprogramming is not deleted under Reset Video menu Analogue Settings Audio mode HDP modeAudio menu Decoder De-emphasis Frequency left/rightBandwidth Playback Video Recorder ConnectionRecording Modulator reception Analogue Decoder Connection Preparation Data Transfer from Receiver to ReceiverTransferring channel list Transferring operating software Technical Reference Technical features HF features Technical data Scart socket assignments Accessories Connection arrangement Connection examples Analog DVB Glossary, Abbreviations DiSEqC Glossary of Technical Terms Symbol rate DiSEqC menu ServiceSatellite DNR Index Index Page Page Page Page 998.6252/0800/ZWT/PF Subject to technical modifications