Audio menu, Decoder, HDP mode, Startprog | Kathrein UFD 545 manual

Analogue Settings

Decoder

Set the corresponding decoder mode if a decoder is connected to the VCR/AUX socket. Refer to the operating instructions of the decoder for corresponding information.

Press the -or + buttons to select the relevant type of modulation

∙MAC,

∙PAL or

∙Canal+.

The factory setting is "OFF".

HDP mode

With HDP mode set to OFF, the receiver will generate a replacement video signal (blue picture) if no signal is received in analogue mode. This substitute signal must be switched off as the automatic positioner HDP 160 can evaluate only the video signal actually received during the automatic satellite scan and setting procedure.

Press buttons -or +to select "ON" or "OFF".

The factory setting is "OFF".

Startprog

Indicates the start channel and therefore the satellite, with which the HDP is to carry out automatic positioning of the antenna. You can determine the channel by

pressing -or +.

Check the region where you are located and whether the antenna is suitable for this region before starting the automatic setting procedure of your satellite antenna. For this purpose, we have provided a leaflet with this User's Guide indicating the frequencies and footprints of the ASTRA and HotBird satellites as well as Türksat.

Audio menu

Press the Mbutton twice to open the

audio menu. Use the oubuttons to select the required subpoints.

Audio mode

In audio mode you can select the required sound signal by pressing the -or + button

∙stereo,

∙mono left or

∙mono right.

The basic setting is "STEREO“.

45

Image 45

Kathrein UFD 545 manual Audio menu, Decoder, HDP mode, Startprog, Audio mode

Contents

DVB Satellite Receiver Page Important information Foreword Contents Timer Settings Sound Settings Glossary, Abbreviations Glossary of Technical Terms Safety Information Ventilation Setting-up locationMoisture, sunlight, heat Mains voltage Controls, Indicators, Displays and Connections Front viewRear view Channel Remote control function buttons Receiver on the command set Switching over between Remote Control Command Sets Menu concept Button functionsAlphanumeric entries Language selection OSD Connection and Startup Presetting of the receiving systemTo connect the receiver Sat-IF connection LNB supply voltage Inserting batteries in the remote controlModulator connection TV and video recorder connection Switching on for the First Time Factory setting of the receiverFirst steps Important on-screen displays OSD On-Screen Displays Channel selection Selecting a TV channelReception status digital Reception status analogue Switching over to radio channel Selecting a radio channel by number entry Timer Settings Setting the volume Sound SettingsStereo and two-channel sound reproduction Mute Channel Lists TV/radio Selecting TV and radio channels last receivedFavourite channels To delete a channel To sort the channels To add a channel Analogue channel lists To add an analogue channel Adding/Removing Satellites To set up satellites To remove satellites To enter a satellite name Current Channel Overview This function cannot be selected in analogue mode Password Factory settingEntering a password Parental control Operation in exceptional cases Operation from the Front Panel Local time/timer Setting System ParametersSystem parameters Parental control Summer time Timer menuTV type Picture format Mod.Ch Mod.typOSD colour OSD-Trans LNB configuration Installation Menu Changing the oscillator frequency Satellite scan Antenna settings Scan completed Press OK button TP setup/scan Analogue transponder KHz signal DiSEqC UFO setup Tone burst Preprogramming is not deleted under Reset Video menu Analogue Settings Audio mode HDP modeAudio menu Decoder Frequency left/right BandwidthDe-emphasis Video Recorder Connection RecordingPlayback Modulator reception Analogue Decoder Connection Preparation Data Transfer from Receiver to ReceiverTransferring channel list Transferring operating software Technical Reference Technical features HF features Technical data Scart socket assignments Accessories Connection arrangement Connection examples Analog DVB Glossary, Abbreviations DiSEqC Glossary of Technical Terms Symbol rate Service SatelliteDiSEqC menu DNR Index Index Page Page Page Page 998.6252/0800/ZWT/PF Subject to technical modifications