Kathrein UFD 545 manual Adding/Removing Satellites, To set up satellites

Adding/Removing Satellites

To set up satellites

New satellites, can, of course, be included in the LNB configuration.

Due to the associated on-screen displays, all settings and editing must be made from a digital channel slot.

For this purpose, you must know the orbital position of the satellites in order to align the antenna (satellite dish). The menu point "antenna settings" in the installation menu can be used as an aid for the purpose of aligning the antenna.

After accessing the main menu Mand the submenu "Installation" – press the

ouand Obuttons (plus password) to select "LNB configuration".

Select this setting with O, you can now enter or select a new satellite.

Bear in mind that your system must be set up accordingly!

In the next step, press o

uto go to, e.g. the entry "User1".

After pressing the -or +buttons, the on- screen display shown opposite appears.

Confirm by pressing O.

You now see the message:

Changes being saved

Please wait

You can now make the entries corresponding to your receiving system at the necessary positions with the buttons o,uand -or +and then exit the

menu by pressing L 3 times. The new satellite data are saved simultaneously.

Use the number buttons on the remote control to make the alphanumeric entries.

Refer to section "Notes on operation" for information on the exact procedure.

27