Kenmore 385.162213 owner manual Bar Tacking, Embroidery

Bar Tacking

(_) Stitch		selector:		3
(_) Stitch		width:		2 to 65
®	Stitch	length:		05 to	1
®	Needle		thread tension:	2 to 6
®	Presser		foot A:	Zigzag	foot

This is similar to a very short satin stitch, and is used to reinforce points of strain such as corners, pockets and straps of lingerie.

Sew four (4) to six (6) stitche& Q Bar tack

Embroidery

O	Stitch	selector:	3
®	Stitch	width:	1 to	6.5
®	Stitch	length:	Any
®	Needle thread tension:		2 to	6
®	Feed dogs:		Dropped
*	Presser foot:		Remove

Drop the feed dogs, and then remove the foot holder. Adjust stitch width as desired. Draw a design onto the fabric with tailor's chalk_ Stretch the fabric between embroidery hoops, and then place the fabric under the needle.

Lower the presser foot lifter to engage the needle thread tension. Holding the needle thread in your left hand, rotate the handwheel counterclockwise for one complete turn Pull the needle thread to draw the bobbin thread to the right (top) side of the fabric. At medium speed, stitch along the marked outline, guiding the fabric carefully by hand After embroidery is completed, raise the feed dogs for normal sewing.

f

Q

(

®®

\	J
	f

J

f

O

(

( t 'J}®

®®

J

f

J

52