Kenmore 385.162213 owner manual o How to adjust Slide the stitch Slide the stitch Slide the stitch

If the button is extremely thick, make a test buttonhole.	f
If it is difficult to fit the button through the test buttonhole,
lengthen the buttonhole by pulling the button holder back to
create a gap (_).
(_) Gap

\

o How to adjust Slide the stitch Slide the stitch Slide the stitch

J

buttonhole stitch density					f
length control to adjust stitch density,
length	control	to	1 for a looser	density(_),	®	®
length	control	to	0,25 for a tighter density

STRETCH'_ /LENGTH

Y,0_1_2--3--4

If the sides of the buttonhole are not balanced, do the following:

=If the buttonhole looks like ®, use the screwdriver to move the lever to the right (+) to make the left side of the buttonhole less dense (see illustration),

otf the buttonhole looks like (_, use the screwdriver to move the lever to the left (-) to make the left side of the buttonhole denser

Buttonhole pitch balance adjusting lever

f

®

®

H/

H_

J

- AUTO BH + 1

... J

78