Kenmore 385.162213 Section Ii. Getting Ready To Sew, Connecting Machine to Power Supply

SECTION II. GETTING READY TO SEW

Connecting Machine to Power Supply

(_ Power supply plug (_) Power switch

(_) Outlet

@Machine socket (_ Machine plug (_ Light bulb

Before connecting the power cord, make sure the voltage and frequency shown on the machine conform to your electrical power

1 Turn off the power switch (_.

2, Insert the machine plug(_)into the machine socket @ 3 Insert the power supply plug(_into the outlet(_

4.Turn the power switch(_)to turn on the power and sewing light (_.

Before Using Your Sewing Machine

Before using your sewing machine for the first time, place a waste fabric under the presser foot and run the machine with thread for a few minutes Wipe away any oil which may appear

For Your Safety

*While in operation, always keep your eyes on the sewing area Do not touch any moving parts such as the thread take-up lever, handwheel or needle.

*Always turn off the power switch and unplug from the power supply:

-When leaving the machine unattended

-When attaching or removing any parts

-When cleaning the machine.

*Do not place anything on the foot control, when not sewing.

Polarized plug

This appliance has a polarized plug (one blade wider than the other) To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way If the plug does not fit in the outlet, reverse the plug If it still does not fit, contact a qualified electrician to install the proper outleL Do not modify the plug in any way.

Foot Controller Model YC-482J-1 or TJC-150 is used with Sewing Machine Model 385.16221XXX (XXX represents numbers 000 through 999)

Controlling Sewing Speed

Sewing speed is varied by the foot control.

The harder you press on the foot control, the faster the machine runs

f

®

®

J

/

J

f

J

f