Automatic Buttonhole

(_) Stitch width:
Stitch length:
(_ Needle thread tension:
(_ Presser foot R:
3 to 6,5
Blue zone
2to 6
Automatic buttonhole foot
e Preparation for Sewing
(:3 Groove
Pin
Attach the automatic buttonhole foot R,,
Make sure the groove on the holder catches the pin on
the foot when lowering the presser foot.,
_ WIDTH
_ LENGTH (_
,,J
o TO Sew
Button holder
Q Buttonhole lever
The buttonhole size is automatically set by placing the
button in the rear of the automatic buttonhole foot.
The button holder on the foot takes a button up to 1"
(2.5 cm)in diameter,
Make a test buttonhole on an extra piece of the fabric
to check your settings,
Use interfacing on stretch fabrics.
Pull the button holder (_ to the back, and place the
button in it, Push it together tightly on the button
Pull the buttonhole lever (_ down as far as it wil! go,
f
G

B

.J
74