Automatic Buttonhole (Continued)
To Sew
(_ Stitch width:
(_) Stitch length:
Needle thread tension:
(_ Presser foot:
2
3to4
2to6
Buttonhole foot
NOTE: Best results are obtained by using #60 or
#80 lightweight thread for bobbin thread.,
It is advisable to use a #t 1 blue stretch
needle when sewing knits and synthetic
fabrics,, "You can obtain buttonholes with
wider cutting space by setting stitch width
at 1o5 instead of 2_
(i_ Needle thread
(_ Bobbin thread
(_) Two round holes
(_) Rectangular hole
(_) Two pins fitting with the two round holes
(_) Lever
0 Hook fitting with the rectangular hole
(_ Base plate
Remove the extension table (accessory box)., Raise
the needle to its highest position by turning the
handwheel counterclockwise° Remove the foot
holder., Pull bobbin thread about 3" (7 cm) straight
back toward the rear of the machine. Insert the hook
of the base plate 0 into the rectangular hole on the
needle plate (_o Pull lever (_ back to align the hook
with the rectangular hole, Snap base plate (_ down
to fit the two pins _'_ at the back of base plate into
the two round holes on needle plate (_. Release the
lever,,
f
_ WIDTH
_ LENGTH
@
(i)®
®
86