Kenmore 808353 manual Trap P or Above, Drain

DRAIN

Referring to Figures 8 and 9. install the drain connection parts (Y branch tail-piece, disposer adapter, air gap, etc ) in the location selected Instali the drain hose corner support in the corner of the cabinet next to the dishwasher

directly above the 2" access hole The top of the support should be 30" above the kitchen floor 124-'above cabinet floor)

IMPORTANT:

THE DRA!N LOOP MUST BE FIXED ATA lvl!N,!MUM HEIGHT,,QF,,,32 INCHES BY USE OF A SUITABLE CLAMP OR SUPPORT._ONE -IYPE OF WHICH IS SHOWN BELOW.

Drain Hose (Furnished)

Corner Support Bracket (Furnished

			"'Branch	Tailpie(:
Entry	MUST be	\	Trap P or	S
above	trap	_1_ t
		\

Trap P or S

SINK AT LEFT

SINK AT RIGHT

3O"Top of Corner Support

Bracket To Floor

2 Access Hole--

FIGURE8

Route the hose from the dishwasher cabinet through 1he 2" access hole, then behind the corner support to the drain and connect Be sure all bends are smooth and the hose is adequately supported The free end of the hose should extend into the dishwasher cabinet 20" if the hole is on the left side, and32" if the hole is on the right side Cut the

hose to length, being sure cut is square

13