PROBLEM |
|
|
|
|
| POSSIBLE | CAUSE | ||||
Dishwasher | omits | portion | 1 | Damaged | or | defective | timer | switch or | |||
of a selected | wash | cycle |
| cams | inside | timer | case |
|
| ||
|
|
| 2. | Open | circuit | between | selector | switch and | |||
|
|
|
| timer (Rapid advance timer only.) | |||||||
|
|
| 3. | Defective | efectrical | component.. | |||||
|
|
| 4, | Pinion | gear | slipping |
| on | rapid | advance | |
|
|
|
| motor | shaft |
|
|
|
|
|
ACTION
1 Refer to timer testing
2.Refer to wiring diagram and trace circuit for power loss.
3, Check component associated with missed portion of cycle,
4..Replace timer Applies to dishwashers with rapid advance timer
Dishwasher performs part of the cycle at incorrect times°
1.Lead wires connected to incorrect timer terminals
2.Selector switch improperly wire&
3, Pinion gear slipping on rapid advance motor shaft
tRefer to wiring diagram for correct connections.
2o Refer to wiring diagram for correct connection_.
3.Replace timer. Applies to dishwashers with rapid advance timers.
Dishwasher stops part way through a cycle
4.Damaged or defective sefector switch.
1.Cycle setector button is not fulfy depressed,
2_ Wires disconnected at the selector switch terminals.
4, Check selector switch per wiring diagram
1, Refer to Owners Manual on proper way to use dishwasher.,
2 Reconnect wires
3.Open circuit inside the selector switch
4, Timer damaged or switches making and breaking at wrong time
3, Refer to selector switch circuitry on wiring diagram and check continuity
4, Refer to wiring diagram and cycle chart.. Check all timer switches for correct length of time each should be closed,,
Stuck in portion of the
cycle (Timer will not advance)
1..Open circuit to motor.
2.Wire disconnected at heater°
3, Thermostat contacts not closing to start timer motor after water reaches
temperature in the delay (sani} periods,
t, Refer to wiring diagram and check this circuit.
2. Reconnect wire
3.Check thermostat..
4.Open circuit or damaged selector swltch_
5Defective timer motor
4, Refer to wiring diagram and check circuitry of selector $'witch_
5.Check if power to timer motor. If timer motor has power and is rotating, the timer is defective.
86