VV
OO
LL
DISC/BAND
V.SEL | SCREEN |
EJECT
ATT | SOURCE | TI |
PQ R
QTraffic Information Function
You can listen to traffic information. If you are listening to discs, they will continue playing until a traffic bulletin is broadcast.
Turning TI function On/Off
Press the [ TI ] button to turn the function on and off. When the function is on, the TI indicator is displayed.
If you are listening to a disc when a traffic bulletin begins, playback will be interrupted. When the bulletin ends or poor reception causes signal losses , the disc will continue to play again.
RSeeking to a Different Traffic Information Station
Use the [ 4 ] / [ ¢ ] button to make an auto seek of the TI stations in a certain band.
NOTE
•When you are listening to a disc, you cannot change to another TI station.
•When the auto TP seek function is turned on and reception starts to weaken, the tuner automatically seeks stations with better reception.
•If you are tuned to a station that is not a traffic information station itself but which provides <Enhanced Other Network> services, you can still have traffic information received.
PPresetting the Volume for Traffic Information/News
QPreset the volume level to be used for traffic
information and news broadcasts.
1Tune into the station for which you want to set the volume.
2Adjust the volume to the desired level.
3Hold down the [ TI ] button for two seconds or more.
The volume level that has now been stored. Future traffic information/news broadcasts are heard at the preset level.
NOTE
• The volume cannot be lowered by this
function during tuner reception. The volume is only set when it is louder than the listening volume of the tuner.
•You can arrange only to listen to traffic information or news bulletins with at preset volume with the volume set at minimum.
31
