FM/AM Tuner Control Function
FM/AM Tuner Control Screen
A B C D E F G
I | J | K | L |
H | ||
AUTO 1/AUTO 2 /MANU indicator |
| |
| Preset Band Preset number | Frequency |
| LO.S indicator | TI indicator |
| ST indicator | AF indicator |
| NEWS indicator | |
|
| |
E Selecting the FM Bands | K Station Preset Memory |
Touch [ FM ] to select the FM band.
Each time you touch [ FM ] , the band switches between the FM1, FM2 and FM3.
CSelecting the MW/LM Band
Touch [ AM ] to select the MW/LW band.
FSelecting the Seek Mode
You can choose from three seek modes: auto seek, preset station seek, and manual seek.
Each time you touch [ SEEK ], the mode switches as follows:
|
|
|
▼ |
| |
AUTO 1: | Auto Seek Mode | |
▼ |
| |
AUTO 2: | Preset Station Seek Mode | |
▼ |
| |
MANU: | Manual Seek Mode | |
|
|
|
|
|
|
DTuning
Auto Seek Mode (AUTO1)
•Touch [ ¢ ] to seek increasing frequencies.
•Touch [ 4 ] to seek decreasing frequencies.
Preset Station Seek Mode (AUTO2)
•Touch [ ¢ ] to move to the next preset station.
•Touch [ 4 ] to move to the last preset station .
Manual Seek Mode (MANU)
•Touch [ ¢ ] to increase the frequency by one step.
•Touch [ 4 ] to decrease the frequency by one step.
NOTE
The ST indicator is displayed when stereo broadcasts are being received.
Store the frequency of the station currently being listened to. You can then recall that station with a single touch of a button.
1Select the band/station that you want to have stored.
2Hold down preset station number [ 1 ] - [ 6 ] that you want to use for the station, for two seconds or more.
NOTE
You can store 6 stations in each of the FM1, FM2, FM3, and AM(MW/LW) band.
AAuto Memory Entry
You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. Up to 6 frequencies can be stored this way.
1Select the band for auto memory entry.
2Touch [ AME ].
3Touch [ 4 ] or [ ¢ ] to start auto memory entry.
The preset station numbers [ 1 ] - [ 6 ] are shown in order.
When all the stations in a certain band are stored in the preset memory, the auto memory entry stops. The tuner then plays the last station received.
NOTE
•When the AF function is turned on whilst auto memory entry takes place, only RDS stations (i.e., stations with RDS capability) are stored. RDS stations that have been preset for FM1 cannot also be preset in FM2 or FM3.
•When the local seek function is turned whilst auto memory entry takes place, stations with poor reception are not stored.
•When the Traffic Information function is on, only the local traffic information station frequency will be stored.
29
