System Setup Function
System Setup
A C D
System Setup
FH
B | E | G |
I
ASetting the AV Input-1 Mode
Each time you touch [
" Navigation "
When the Navigation unit is connected to the AV- INPUT1 terminal.
" Video "
When the Video Deck is connected to the AV- INPUT1 terminal.
AE Selecting the Dual Zone Speaker
<When the 5.1 ch DSP unit is connected>
You can select whether to output
Each time you touch [ 2zone SP ], the mode switches as follows:
" Normal "
" Reverse "
BSetting the AV Input-2 Mode
Each time you touch [
" Back Camera "
When the Back Camera unit is connected to the
" Normal "
When the Video Deck is connected to the AV- INPUT2 terminal.
CSetting the AV Output Mode
Each time you touch [
" DVD "
Picture/sound from DVD/VCD/CD.
" TV "
Picture/sound from television.
"
Picture/sound from
"
Picture/sound from
DSetting the Dual Zone mode
<When the 5.1 ch DSP unit is connected>
The following operation allows separate sound sources to control the output of the front and rear speakers.
Each time you touch [ 2zone ], the mode switches as follows:
" ON "
The dual zone system function is on.
" OFF "
The dual zone system function is off.
NOTE
No display [2zone SP] when the “2zone” is set to “OFF”.
FSetting the Touch Sensor Tone
Each time you touch [ Beep ], the mode switches as follows:
" ON "
Touch sensor tone is turned on
" OFF "
Touch sensor tone is turned off
GSetting the TV Control by Remote On/Off
If this unit also runs when operating other units with different Kenwood remote controls, its remote control function can be turned off.
Each time you touch [ REMO ], the mode switches as follows:
" ON "
Remote control function is on
" OFF "
Remote control function is off
HSetting the Auto Scroll Display Function
This function permits the text to be scrolled and the entire text to be displayed. Switching between manual scrolling and automatic scrolling is permitted.
Each time you touch [ Scroll ], the mode switches as follows:
" Auto " Automatic scrolling
" Manual "
Manual scrolling
12
