Kenwood KVT-920DVD instruction manual Quick Effect Function, Recalling Your Sound Settings

Quick Effect Function

	Quick Effect Screen
A	B	C

		D	E	F
A					F
	Adjusting the Balance Levels					Returning to the Source Control Screen

•Each time you touch [ ], the sound in the left channel is emphasised.

•Each time you touch [ ], the sound in the right channel is emphasised.

Touch [ RTN ] to return to the Source Control Screen.

DAdjusting the Fader Levels

•Each time you touch [ ], the sound in the front channel emphasised.

•Each time you touch [ ], the sound in the rear channel emphasised.

ERecalling Your Settings of the Crossover Network/Delay time

<When the KDS-P900 is connected>

Touch [ 1 ] -[ 6 ] for the desired Crossover network and delay time setting.

BRecalling Your Sound Settings

<When the KDS-P900 is not connected>

Touch [ 1 ] -[ 5 ] for the desired sound preset setting.

<When the KDS-P900 is connected>

Touch [ 1 ] -[ 3 ] for the desired parametric equaliser setting.

CExternal Amp Control

Adjust the bass boost level of the external amplifier using the main unit.

Each time you touch [ Amp Ctrl ] to switch the Bass boost level as follows

" OFF "

Bass boost level is flat.

" MODE1 "

Bass boost level is low (+6dB).

" MODE2 "

Bass boost level is high (+12dB).

NOTE

As of December 2000, the power amplifiers controllable by the main unit are as follows: KAC-X501F/PS501F/X401M/PS401M/X301T /PS301T/X201T/PS201T

53