Kenwood KVT-920DVD Monitor Control Function, Opening/ Closing the Monitor, Power Off

Monitor Control Function

A	A Opening/ Closing the Monitor
	Opening the Monitor
	1	Set the vehicle’s parking brake.
	2	Press the OPEN button. The monitor will open.
	3	Once the monitor is fully out, lift it by hand and
		set it to an easily visible angle.

TRACK/TUNE

VV

OO

LL

			DISC/BAND
		V.SEL		SCREEN
				EJECT
		ATT	SOURCE	TI
B	C	D		E

Screen Mode

[ FULL ] [ ZOOM ]

[ JUST ] [ CINEMA ]

[ NORMAL ]

Closing the Monitor

Set the lower the monitor so that it is completely flat.

The monitor is then drawn in automatically after one second.

2CAUTION

The gear shift lever or other parts may interfere with the monitor when it opens. If so, move the gear shift lever (being sure to do so safely) before operating the set. (The monitor is drawn back in automatically if it cannot be opened normally due to an obstacle.)

NOTE

•The monitor cannot be opened unless the parking brake is set.

•The position to which the monitor slides when the power is turned on can be set. (Refer to the angle control screen( Page 9).

APower Off

•Hold down the OPEN button for one second or more to turn the set’s power off.

•Press the OPEN button to turn the power on.

BSwitching the Monitor’s Picture

Each time you press the V.SEL button, the monitor’s picture switches as follows:

∞

Source control screen

∞

DVD, VCD or CD picture

∞

TV or Video picture

∞

Navigation picture

NOTE

When the “AV-IN2” setting to “Back Camera”, the switching items become the Back Camera picture. (Refer to system setup screen(page 12))

2CAUTION

You cannot view television and video pictures whilst the vehicle is moving. To enjoy television and video pictures, find a safe place to park and engage the parking brake.

8