16

Dispensing hot water

Hot water can also be dispensed from the frothing arm. This provides a convenient way to

make Americanos, tea, or hot chocolate. Filling a demitasse with hot water is also a great

way to warm it before brewing espresso.

NOTE: Always dispense hot water into an empty container – dispensing into a cup or

pitcher containing other ingredients may cause splattering.

1Press and hold the On/Off power
button until the ON indicator lights up.
3With the frothing arm pointed into an
empty cup, open the Steam Dial by
turning it slowly counter-clockwise.
Then press and hold the Hot Water
button to dispense water.
2Wait until the Espresso Machine has
reached operating temperature; this
will take approximately 6 minutes.
When the frothing boiler temperature
gauge needle climbs into the “ready”
zone, the Espresso Machine is ready
to dispense hot water.
4When the desired amount of water has
been dispensed, release the Hot Water
button and close the Steam dial by
turning it clockwise until it stops.

NOTE: Residual frothing steam may exit the nozzle before water dispenses. It may take

several seconds for water to begin flowing from the nozzle.

TIPS FOR GREAT RESULTS