KitchenAid KSC700 Care and Cleaning, Fitting the removable Silicone Lid Seal back onto the lid

Care and Cleaning

1.Check that the Slow Cooker is switched off and unplugged before cleaning.

2.Allow the Slow Cooker to cool completely before cleaning.

NOTE: Do not immerse the metal housing in water.

NOTE: Do not use abrasive cleaners or scouring pads.

3.Wipe the metal housing and cord with a clean damp cloth.

4.Wash the ceramic pot, glass lid and silicone lid seal in hot soapy water, then rinse and dry. The ceramic pot, glass lid and silicone lid seal can also

be washed in the dishwasher. To wash the silicone lid seal in a dishwasher, remove it from the glass lid.

NOTE: When cooking very thick mixtures, such as polenta or many desserts, the ceramic pot may be lightly coated with no-stick cooking spray before cooking. This coating will help make cleanup easier after cooking.

Fitting the removable Silicone Lid Seal back onto the lid

After removing the silicone lid seal to clean it, and allowing it to dry thoroughly, here is a quick way to put it back on:

1.On a table or countertop, place the lid upside down with the length of the lid facing away from you.

2.Straighten out any twists or kinks in the seal, and place the seal over the lid to make sure the rounded corners of the seal match up with the rounded corners of the lid.

3.Start fitting the seal around the far side of the lid and work toward the other end.

4.Once the seal covers half the lid, flip the lid over, so the end that had been closest to you is now farthest away.

5.Now stretch the seal over the remaining part of the lid.

6.If the seal appears uneven, you may work the seal around the lid until the seal is even.

ENGLISH

11