4 Pull out Tray 1, and then remove all media from the tray.5 Fan the media you removed and then align it well.

" If transparencies are loaded, do not fan them; otherwise, static electricity may be produced, resulting in another media misfeed.

6 Load the media face up in Tray 1.

"

"

Make sure that the media is flat.Do not load paper above the  mark.

Do not load more than 10 envelopes or 20 sheets of labels, post- cards, thick stock, or transparencies at one time.

" Slide the media guides against the edges of the media.

7 Close Tray 1.

Clearing Media Misfeeds

95