Do not leave the printer’s covers open for any length of time, especially in
Do not open the printer during printing.
Do not tap media stacks on the printer.
Do not lubricate or disassemble the printer.
Do not tilt the printer.
Do not touch the electrical contacts, gears, or laser devices. Doing so may damage the printer and cause the print quality to deteriorate.
Keep media in the output tray at a minimum level. If the media is stocked too high, your printer may experience media misfeeds and excessive media curl.
Make sure two people are avail- able to lift the printer when mov- ing it.
Keep the printer level to avoid toner spillage.
When lifting the printer, grasp the areas shown in the figure to
the right.
Even if an optional lower feeder unit is installed, be sure to lift the printer as shown below. Do not grasp the grip of Tray 2, 3 or the right side cover; otherwise, the lower feeder unit may be dam- aged.
Maintaining the Printer | 81 |