" If you have problems feeding 20 sheets, try loading only 1–10 sheets at a time. Loading a large number of transparencies at one time may cause static buildup, thus causing feeding problems.

Capacity

Tray 1

Up to 20 transparencies, depending on their

 

 

thickness

 

 

 

 

Tray 2 and 3

Not supported

Orientation

Face up

 

Driver

Transparency

 

Media Type

 

 

Duplexing

Not supported

 

Use transparencies that are

„Approved for laser printing

DO NOT use transparencies that

„Have static electricity that will cause them to stick together

What Is the Guaranteed Imageable (Printable) Area?

The printable area on all media sizes is

 

 

 

 

 

a

 

 

 

 

 

a

up to 4 mm (0.157") from the edges of

a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the media.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Each media size has a specific image-

 

 

 

 

 

 

 

Printable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

able area, the maximum area on which

 

 

 

 

 

 

 

 

 

 

 

the printer can print clearly and without

 

 

 

 

 

 

 

 

Area

 

 

 

 

distortion.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This area is subject to both hardware

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

limits (the physical media size and the

a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

a = 4 mm (0.157")

 

 

 

 

margins required by the printer) and

 

 

 

 

 

 

 

 

software constraints (the amount of

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

memory available for the full-page frame buffer). The guaranteed imageable (printable) area for all media sizes is the page size minus 4 mm (0.157") from all edges of the media.

Media Types

39