5 Insert the new DIMM straight into the DIMM connector until the latches snap into the locked position.

Observe the keyed side of the DIMM to align it with the connec- tor. If you cannot snap the DIMM into place, do not force it. Reposition it, making sure that the DIMM is seated completely in the connector.

6 Reinstall the panel and tighten the seven screws.

7 Attach the rear cover.

8 Reconnect all interface cables.

9 Reconnect the power cord, and turn on the printer.

10 Print a configuration page (SPECIAL PAGES/PRINT CONFIG PAGE MENU) and verify that the total size of the RAM installed in your printer is listed.

Dual In-Line Memory Module (DIMM)

129