Envelopes

Print on the front (address) side only. Some parts of the envelope consist of three layers of paper—the front, back, and flap. Anything printed in these layered regions may be lost or faded.

Capacity

Tray 1

Up to 10 envelopes, depending on their

 

 

thickness

 

Tray 2 and 3

Not supported

Orientation

Face up

 

Driver

Envelope

 

Media Type

 

 

Weight

91–163 g/m² (25–43 lb)

Duplexing

Not supported

 

Use envelopes that are

„Common office envelopes approved for laser printing with diagonal joints, sharp folds and edges, and ordinary gummed flaps

" Because the envelopes pass through heated rollers, the gummed area on the flaps may seal. Using envelopes with emulsion-based glue avoids this problem.

„Approved for laser printing

„Dry

DO NOT use envelopes that have

„Sticky flaps

„Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal- ing

„Transparent windows

„Too rough of a surface

„Material that will melt, vaporize, offset, discolor, or emit dangerous fumes

„Been presealed

Media Types

35