This message...

means...

do this...

 

 

 

FUSER

The fuser unit is not

Contact Technical Sup-

NOT ATTACHED

installed.

port with the error infor-

 

 

mation.

MEDIA JAM

Media has misfed in

Locate and remove the

DUPLEX LOWER

the duplex option.

misfeed.

 

 

 

MEDIA JAM

Media has misfed in

 

DUPLEX UPPER

the duplex option.

 

 

 

 

MEDIA JAM

Media has misfed

 

FUSER

leaving the fuser

 

 

area.

 

MEDIA JAM

Media has misfed in

 

TRANSFER ROLLER

the transfer roller

 

 

area. This type of

 

 

misfeed means that

 

 

the media did not

 

 

make it to the paper

 

 

exit area.

 

 

 

 

MEDIA JAM

Media has misfed

 

TRAY X

while being pulled

 

 

from the specified

 

 

tray (X).

 

 

 

 

MEDIA JAM

A media misfeed

After clearing the media

UNDEFINED

occurred because the

misfeed, check the

 

driver settings are

driver settings.

 

inconsistent.

 

 

 

 

NO GENUINE TONER

The X toner cartridge

Install a genuine

X

is not genuine.

KONICA MINOLTA toner

 

 

cartridge.

PUT MEDIA : TRAY 1

The media type set in

Load the correct media

“MEDIA”

the printer driver is

type into Tray 1.

 

different from the type

 

 

of media loaded into

 

 

Tray 1.

 

 

 

 

PUT MEDIA : TRAY X

The media size set in

Load the correct media

“SIZE”

the printer driver is

size into the specified

 

different from the size

tray.

 

of media loaded.

 

 

 

 

122

Status, Error, and Service Messages