Konica Minolta 5430 DL Antistatic Protection, Introduction

Introduction

Note

Use of accessories not manufactured or supported by

KONICA MINOLTA will void your warranty.

" This chapter provides information about the following accessories.

Dual In-Line	512 MB DIMM (Buffered)
Memory Module
(DIMM)
Duplex Option	Auto duplexing
Lower Feeder Unit	500-sheet tray included

Note

Installing accessories always requires that the printer and accessories are turned off and unplugged during installation.

Antistatic Protection

Note

Before opening and handling the dual in-line memory module (DIMM), first touch a metal part of the printer to avoid an electrostatic charge building up. When the DIMM is taken out of its conductive bag, hold it by its edges to avoid touching the electronic circuits. When handling the DIMM, be sure to place it on an anti-static mat or a piece of aluminum foil.

126 Introduction