Korg PA50, PA50sd Amp EG Level modulation, Amp EG Time modulation

119

Program operating mode

Page 16 - Amp EG

Start Level

This parameter speciﬁes the volume level at note-on. If you

want the note to begin at a loud level, set this to a high value.

Attack Level

This parameter speciﬁes the volume level that will be reached

after the attack time has elapsed.

Break Level

This parameter speciﬁes the volume level that will be reached

after the decay time has elapsed.

Sustain Level

This parameter speciﬁes the volume level that will be main-

tained from after the slope time has elapsed until note-off

occurs.

Attack/Decay/Slope/Release Time

These parameters specify the time over which the volume

change will occur.

0…99 Time value.

Attack Time

This parameter speciﬁes the time over which the volume will

change after note-on until it reaches the attack level. If the

start level is 0, this will be the rise time of the sound.

Decay Time

This parameter speciﬁes the time over which the volume will

change from when it reaches the attack level until it reaches

the break point level.

Slope Time

This parameter speciﬁes the time over which the volume will

change from when it reaches the break point level until it

reaches the sustain level.

Release Time

This parameter speciﬁes the time over which the volume will

change after note-off until it reaches 0.

Amp EG ‘Level’ modulation

AMS(L) (Alternate Modulation Source)

This parameter speciﬁes the source that will control the

“Level” parameters of the amp EG. See “AMS (Alternate

Modulation Source) list” on page 123.

Intensity

This parameter speciﬁes the depth and direction of the effect

that “AMS” will have. For example, if “AMS” is Velocity, set-

ting “Start Level Swing”, “Attack Level Swing” and “Break

Point Level Swing” to + and setting “Intensity” to a positive

(+) value will cause the amp EG volume levels to increase as

you play more strongly. Setting “Intensity” to a negative (–)

values will cause the amp EG volume levels to decrease as you

play more strongly. With a setting of 0, the levels will be as

speciﬁed on “Page 16 - Amp EG”.

-99…+99 Intensity value.

Start Level Swing

This parameter speciﬁes the direction in which “AMS” will

change “Start Level”. If “Intensity” is set to a positive (+)

value, setting this parameter to + will allow AMS to increase

the EG level, and setting this parameter to – will allow AMS

to decrease the EG level. With a setting of 0, no change will

occur.

Attack Level Swing

This parameter speciﬁes the direction in which “AMS” will

change “Attack Level”. If “Intensity” is set to a positive (+)

value, setting this parameter to + will allow AMS to increase

the EG level, and setting this parameter to – will allow AMS

to decrease the EG level. With a setting of 0, no change will

occur.

Break Point Level Swing

This parameter speciﬁes the direction in which “AMS” will

change “Break Level”. If “Intensity” is set to a positive (+)

value, setting this parameter to + will allow AMS to increase

the EG level, and setting this parameter to – will allow AMS

to decrease the EG level. With a setting of 0, no change will

occur.

Amp EG ‘Time’ modulation

These parameters let you use an alternate modulation source

to modify the amp EG times that were speciﬁed in “Attack/

Decay/Slope/Release Time” on page 119.

AMS1(T) (Alternate Modulation Source 1 - Time)

This parameter speciﬁes the source that will control the

“Time” parameters of the amp EG (see “AMS (Alternate

Modulation Source) list” on page 123). With a setting of Off,

there will be no modulation.

Intensity

This parameter speciﬁes the depth and direction of the effect

that “AMS1” will have. For example, if “AMS1(T)” is Amp

KTrk +/+, the (Amp) Keyboard Track settings (see “Ampliﬁer

keyboard tracking” on page 117) will control the EG “Time”

parameters. With positive (+) values of this parameter, posi-

tive (+) values of “Ramp (Ramp Setting) will cause EG times

to be lengthened, and negative (–) values of “Ramp (Ramp

Setting)” will cause EG times to be shortened. The direction

of the change is speciﬁed by “Attack Time Swing”, “Decay

Time Swing”, “Slope Time Swing”, and “Release Time”.

When “AMS1(T)” is Velocity, positive (+) values will cause

EG times to lengthen as you play more strongly, and negative

Amp 1 EG changes (Level) (AMS=Velocity, Intensity = a positive (+) value)

Note-on

Note-off

Note-on

Note-off

Note-on

Note-off

Softly played note when Start Level

Swing=0 and Attack Level Swing

and Breack Level Swing are set to +

Strongly played note when Start Level

Swing=0 and Attack Level Swing and

Breack Level Swing are set to +

Strongly played note when Start Level

Swing=0 and Attack Level Swing and

Breack Level Swing are set to +

Amp 1 EG changes (Time) (AMS=Velocity, Intensity= a positive (+) value)



Amp 1 EG changes (Time)

(AMS=Amp KTrk +/+, Intensity = a positive (+) value)

(When Amp Keyboard Track “Low Ramp”= a positive (+) value, and 

“High Ramp” = a positive (+) value)

Note-on

Note-off

Note-on

Note-off

Note-on

Note-off

Note-on

Note-off

Note-on

Note-off

Note-on

Note-off

Low-pitched note played with

Attack, Decay, Slope, and

Release Time Swing at +

Softly played note with

Attack, Decay, Slope and

Release Time Swing at +

High -pitched note played with

Attack, Decay, Slope, and

Release Time Swing at –

Strongly played note with

Attack, Decay, Slope and

Release Time Swing at +

Strongly played note with

Attack, Decay, Slope and

Release Time Swing at –