204 Effects
ER/Delay

045: M.Tap Delay

(Stereo Multitap Delay)

The left and right Multitap Delays have two taps respectively.

Changing the routing of feedback and tap output allows you

to create various patterns of complex effect sounds.

a: Mode
You can change how the left and right delay signals are
panned by modifying the routing of the left and right
delay as shown in the figure above. You need to input dif-
ferent sounds to each channel in order for this parameter
to be effective.
d: Tap1 Level
This parameter sets the output level of Tap1. Setting a dif-
ferent level from Tap2 will add a unique touch to a
monotonous delay and feedback.

046: Modul.Delay

(Stereo Modulation Delay)

This stereo delay uses an LFO to sweep the delay time. The

pitch also varies. You will obtain a delay sound with swell and

shimmering. You can also control the delay time using a

modulation source.

b: D-mod Modulation
When the modulation source is used for control, this
parameter reverses the left and right modulation direc-
tion.
e: LFO Sync, e: Src,
f: L LFO Phase [degree], f: R LFO Phase [degree]
The LFO can be reset via a modulation source.
aMode Normal, Cross Feedback, Cross Pan1, Cross Pan2
Switches the left and right delay routing
bTap1 Time [msec]
Sets the Tap1 delay time
0.0...680.0msec
cTap2 Time [msec]
Sets the Tap2 delay time
0.0...680.0msec
dTap1 Level
Sets the Tap1 output level
0...100
e
Feedback (Tap2)
Sets the Tap2 feedback amount
–100...+100
Src Off...Tempo
Selects the modulation source of the Tap2 feedback amount
Amt –100...+100
Sets the modulation amount of the Tap2 feedback amount
fHigh Damp [%]
Sets the damping amount in the high range
0...100%
Fx:043
gLow Damp [%]
Sets the damping amount in the low range
0...100%
Fx:043
h
Input Level Dmod [%] –100...+100
Sets the modulation amount of the input level Fx:037,
Src
Selects the modulation source for the input level
Off...Tempo
Fx:037
i
Spread –100...+100
Sets the width of the stereo image of the effect sound
Fx:043,
Src Off...Tempo
Selects the modulation source of the effect sound’s stereo image width
Amt –100...+100
Sets the modulation amount of the effect sound’s stereo image width
j
Wet/Dry Dry, 1:99...99:1, Wet
Table , “Sets the balance between the effect and dry sounds,” on page 175
Src Off...Tempo
Table , “Selects the modulation source of the effect balance,” on page 175
Amt
Table , “Sets the modulation amount of the effect bal-
ance,” on page 175
–100...+100
Left
Right
Feedback
Spread
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Input Level D-mod
Input Level D-mod
High DampLow Damp
High DampLow Damp
Delay
Delay
Feedback
Tap1 Level Mode
Mode
(1) (2)
(1) (2)
Tap1=(1)
Tap2=(2)
Mode: Normal Mode: Cross Feedback Mode: Cross Pan1 Mode: Cross Pan2
aModulation Mode LFO, D-mod
Switches between LFO modulation control and modulation source control
b
D-mod Modulation
Reversed L/R control by modulation source
L/R:+/+, L/R:+/–
,
Src Off...Tempo
Selects the modulation source that controls delay time
Response 0...30
Sets the rate of response to the modulation source
c
LFO Waveform
Selects LFO Waveform
Triangle, Sine
LFO Shape –100...+100
Determines how much the LFO waveform is changed Fx:020
dLFO Frequency [Hz]
Sets the LFO speed
0.02...20.00Hz
e
LFO Sync
Switches LFO reset off/on
Off, On
,
Src Off...Tempo
Selects the modulation source that resets the LFO
f
L LFO Phase [degree] –180...+180
Sets the phase obtained when the left LFO is reset
R LFO Phase [degree] –180...+180
Sets the phase obtained when the right LFO is reset
g
L Depth
Sets the depth of the left LFO modulation
0...200
R Depth
Sets the depth of the right LFO modulation
0...200
h
L Delay Time [msec]
Sets the left delay time
0.0...500.0
R Delay Time [msec]
Sets the right delay time
0.0...500.0
i
L Feedback
Sets the feedback amount of left delay
–100...+100
R Feedback
Sets the feedback amount of right delay
–100...+100
j
Wet/Dry –Wet...–1:99, Dry, 1:99...Wet
Table , “Sets the balance between the effect and dry sounds,” on page 175
Fx:010,
Src Off...Tempo
Table , “Selects the modulation source of the effect balance,” on page 175
Amt
Table , “Sets the modulation amount of the effect bal-
ance,” on page 175
–100...+100
Left
Right
Feedback
LFO Phase
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
LFO: Tri / Sine
Modulation Mode
D-mod
LFO
D-mod
Delay
Delay
L/R: +/+ +/–
LFO Shape
Response
LFO Sync