237
Error messages & Troubleshooting
Error messages
Format failed! (Press Exit)
An error occurred during Format. Format operation aborted.
Illegal name (Press Exit)
The name is not allowed on Pa-series instruments.
Insert an SD card and press Enter
While saving the operating system “Save OS” on page 140, or
executing a Backup procedure (see “Backup Data” on
page 140), Pa50SD asks for a card.
Invalid Copy Parameter (Press Exit)
The copy operation was not possible. Maybe you were trying
to copy a file over itself, or copying nested folders.
Load Failed! (Press Exit)
The Load procedure has not been executed. Try again, or try
with different files.
Make New Dir Failed! (Press Exit)
While trying to create a new directory, an error occurred.
Media Write-Protected (Press Exit)
The card is physically protected. Remove the protection, and
try again.
Memory full
This message appears in Backing Sequence mode, when the
memory for recording a Song is full.
No Card/Unformatted. (Sh+Enter to Format)
Either there is no card in the drive, or the card is unformat-
ted. Insert a card, and try again, or press SHIFT+ENTER to
start formatting the card.
Not a Pa-series or Corrupted File
The file you are trying to load is not compatible with Pa-
series instruments.
Not Enough Space on Media
There is no more space to load, save or copy data. The card
operation will be aborted. Replace the card, and use an empty
card to save your data. Should this message appear during
loading, the SSD (Solid State Disk)-based internal memory is
full.
Nothing to Rename (Press Exit)
There are no items to rename.
Overwrite Existing File? (Yes/No)
You are writing data on an existing “.SET” folder, or on a file
of type “.MID” or “.JBX”.
Overwrite on Backup? (Enter/Exit)
Press ENTER/YES to overwrite files carrying the same name
on the target device, or EXIT/NO to avoid overwriting any
file.
Overwrite on Copy? (Enter/Exit)
Press ENTER/YES to overwrite files carrying the same name
on the target device (Press Exit)/NO to avoid overwriting any
file. File that are not yet on card are always copied.
Overwrite Protected Files? (Enter/Exit)
Protected files cannot usually be overwritten. By pressing
ENTER, you can overwrite them during the current opera-
tion.
Rename: Invalid Name (Press Exit)
You can’t use the name you entered. Please retry and select a
different name.
Rename: New Name Must Be a \".SET\
You can’t modify a “.SET” folder extension.
Rename Failed! (Press Exit)
An error occurred during Rename. Rename operation
aborted.
Save Failed! (Press Exit)
An error occurred during Save. Save operation aborted.
Some Files Missing (Press Exit)
This message may appear at the end of a Restore operation.
Some User file may be missing. This is not a problem for the
Factory Data integrity.
Unit Not Found (Press Exit)
You were trying to access a storage device not available on
your instrument.
Unformatted medium
You have selected a medium (card) that is not yet formatted,
or is in a format that Pa50SD can’t recognize. Format the
medium using the Format procedure (see “Page 5 - Format”
on page 139).
Wait
Pa50SD is busy with a card operation.