203
Effects
ER/Delay

c: Envelope Select, c: Src, d: Threshold

These parameters select the source to control the start

and end of recording.

When “Envelope Select” is set to D-mod, the input signal

will be recorded only when the value of the modulation

source selected by the Src parameter is 64 or higher.

When “Envelope Select” is set to Input, the input signal

will be recorded only when its level exceeds the Threshold

level.

When recording is completed, reverse playback starts

immediately.

043: L/C/R Delay

This multitap delay outputs three Tap signals to the left,

right, and center respectively. You can also adjust the left and

right spread of the delay sound.

e: High Damp [%], e: Low Damp [%]

These parameters set the damping amount of high range

and low range. The tone of the delayed sound becomes

darker and lighter as it feeds back.

g: Spread

This parameter sets the pan width of the effect sound.

The stereo image is widest with a value of 50, and the

effect sound of both channels is output from the center

with a value of 0.

044: Cross Delay

(Stereo/Cross Delay)

This is a stereo delay, and can by used as a cross-feedback

delay effect in which the delay sounds cross over between the

left and right by changing the feedback routing.

a
L Delay Time [msec]
Sets the delay time of TapL
0...1360msec
Level
Sets the output level of TapL
0...50
b
C Delay Time [msec]
Sets the delay time of TapC
0...1360msec
Level
Sets the output level of TapC
0...50
c
R Delay Time [msec]
Sets the delay time of TapR
0...1360msec
Level
Sets the output level of TapR
0...50
d
Feedback (C Delay)
Sets the feedback amountof TapC
–100...+100
Src Off...Tempo
Selects the modulation source of the TapC feedback amount
Amt –100...+100
Sets the modulation amount of the TapC feedback amount
e
High Damp [%]
Sets the damping amount in the high range
0...100%
☞
Low Damp [%]
Sets the damping amount in the low range
0...100%
☞
f
Input Level Dmod [%] –100...+100
Sets the modulation amount of the input level ☞ Fx:037,
Src
Selects the modulation source for the input level
Off...Tempo
☞ Fx:037
gSpread 0...50
Sets the width of the stereo image of the effect sound ☞
h
Wet/Dry Dry, 1:99...99:1, Wet
Table , “Sets the balance between the effect and dry sounds,” on page 175
Src Off...Tempo
Table , “Selects the modulation source of the effect balance,” on page 175
Amt
Table , “Sets the modulation amount of the effect bal-
ance,” on page 175
–100...+100
C Delay
R Delay
Left
Right
Feedback
Spread
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out
Input Level D-mod
High DampLow Damp
L Delay
Input Level D-mod
+
Level
Level
Level
aStereo/Cross Stereo, Cross
Switches between stereo delay and cross-feedback delay
bL Delay Time [msec]
Sets the delay time for the left channel
0.0...680.0msec
cR Delay Time [msec]
Sets the delay time for the right channel
0.0...680.0msec
d
L Feedback
Sets the feedback amount for the left channel
–100...+100
Src Off...Tempo
Selects the modulation source of feedback amount
Amt L –100...+100
Sets the modulation amount of the left channel feedback
e
R Feedback
Sets the feedback amount for the right channel
–100...+100
Amt R –100...+100
Sets the modulation amount of the right channel feedback
fHigh Damp [%]
Sets the damping amount in the high range
0...100%
☞ Fx:043
gLow Damp [%]
Sets the damping amount in the low range
0...100%
☞ Fx:043
h
Input Level Dmod [%] –100...+100
Sets the modulation amount of the input level ☞ Fx:037,
Src
Selects the modulation source for the input level
Off...Tempo
☞ Fx:037
iSpread –50...+50
Sets the width of the stereo image of the effect sound ☞ Fx:043
j
Wet/Dry Dry, 1:99...99:1, Wet
Table , “Sets the balance between the effect and dry sounds,” on page 175
Src Off...Tempo
Table , “Selects the modulation source of the effect balance,” on page 175
Amt
Table , “Sets the modulation amount of the effect bal-
ance,” on page 175
–100...+100
Delay
Delay
Stereo/Cross
Left
Right
Feedback
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Input Level D-mod
Input Level D-mod
High Damp Low Damp
High Damp Low Damp
Spread
Stereo/Cross