77
Song Play operating mode
Page 4 - FX: A/B Select
This page lets you select the A and B effects. Usually, the A
effect is a reverb, while the B effect is a modulating effect.
Effects A and B are usually reserved to Sequencer 1. You can,
however, create Songs by using all four effects in Song mode.
Depending on the status of the “S2 FX Mode” parameter, this
effect pair could be reserved to Sequencer 2, too (see
page 80).
Note: When playing back a Song that makes use of all four
effects (A-D), you can’t edit any effect parameter. These param-
eters appear greyed out in the display.
Note: When you stop the Song, or select a different Song, the
default effects are selected again. You can, however, stop the
Song, change the effects, then start the Song again. Edit the Song
in Song mode to permanently change the effects.
A, B
Effects assigned to the A and B effect processors. Usually, A is
the reverb, while B is the modulating effect (chorus, flanger,
delay…). For a list of the available effects, see “Effects” on
page 175.
ModTrk (Modulating Track)
Source track for modulating MIDI messages. You can modu-
late an effect parameter with a MIDI message generated by a
physical controller.
B>Asend (B>A Send)
Amount of the B effect going back to the input of the A effect.
PAGE 4 - FX: C/D SELECTThis page lets you select the C and D effects. Usually, the C
effect is a reverb, while the D effect is a modulating effect.
Effects C and D are usually reserved to Sequencer 2 and the
Realtime tracks. You can, however, create Songs using all four
effects in Song mode. Depending on the status of the “S2 FX
Mode” parameter, Sequencer 2 might also use the A/B effect
pair (see page 80).
Note: When playing back a Song that makes use of all four
effects (A-D), you can’t edit any effect parameter. These param-
eters appear greyed out in the display.
Note: When you stop the Song, or select a different Song, the
default effects are selected again. You can, however, stop the
Song, change the effects, then start the Song again. Edit the Song
in Song mode to permanently change the effects.
C, D
Effects assigned to the C and D effect processors. Usually, C is
the reverb, while D is the modulating effect (chorus, flanger,
delay…). For a list of the available effects, see “Effects” on
page 175.
ModTrk (Modulating Track)
Source track for modulating MIDI messages. You can modu-
late an effect parameter with a MIDI message generated by a
physical controller.
D>Csend (D>C Send)
Amount of the D effect going back to the input of the C
effect.
PAGE 5 - FX: A EDITINGThis page contains the editing parameters for the A effect
(usually, reverb for Sequencer 1).
Use the E-F and G-H VOLUME/VALUE button pairs to scroll
the parameter list.
Use the A-D VOLUMME/VALUE button pairs to select and
edit a parameter.
Use the TEMPO/VALUE controls to edit the selected param-
eter.
Note: When playing back a Song that makes use of all four
effects (A-D), you can’t edit any effect parameter. These param-
eters appear greyed out in the display.
Note: When you stop the Song, or select a different Song, the
default effects are selected again. You can, however, stop the
Song, change the effects, then start the Song again. Edit the Song
in Song mode to permanently change the effects.
Parameters
See “Effects” on page 175 for a list of available parameters for
each effect type.
PAGE 6 - FX: B EDITINGThis page contains the editing parameters for the B effect
(usually modulating effect for Sequencer 1). For more details,
see “Page 5 - FX: A editing” above.
PAGE 5 - FX: C EDITINGThis page contains the editing parameters for the C effect.
You can access this page only when the “S2 FX Mode” param-
eter is set to C/D (see “S2 FX Mode” on page 80). For more
details, see “Page 5 - FX: A editing” above.
Note: C and D effects are used also by the Realtime (Keyboard)
tracks.
A:02 B:97
BigHall MlwChrs
ModTrk:Up1 B>Asend:127
FX:A/B Select
C:02 D:97
BigHall MlwChrs
ModTrk:Up1 D>Csend:127
FX:C/D Select
Rev Time [sec]: 3.07 |
High Damp [%]:0
Pre Dly [ms]:0
Pre Dly Thru [%]:0 |