The /4 option switch is used to format 360K-byte double-sided, double-density diskettes in the computer’s high capacity disk drive. To do this enter the command:

The computer will proceed to format the diskette. Upon completion, you will see this message:

Press ENTER not to have a label of your disk. Then the screen will display;

XXXXXXXbytes total disk space XXXXXXX bytes available on disk

XXX bytes in each allocation unit XXXXX allocation units available on disk

Volume Serial Number is XXXX-XXXX

Format another (Y/N)?

Enter N to return to the system prompt. Remove the diskette from the drive and place it in its protective envelope.

Using Floppy Disks 5-7