In order to change the settings defined by these jumpers, it will be necessary to remove the system motherboard from the chassis. To do this, follow these steps, referring to Chapter 7, “Expanding Your System,” where necessary:
Unplug all of the cables from the rear panel of the main system unit.
Remove the main system unit cover.
Remove all expansion boards from their slot connectors on the system motherboard, noting the location of each board and any internal cable connections, for
Carefully unplug all of the cables connected to the system motherboard, noting their locations for later.
Remove the several screws that attach the system motherboard to the chassis.
Carefully slide the motherboad out of the chassis.
To
Once the motherboard is out of the chassis, proceed to set the configuration switches to match the changes in the system hardware.
System MotherBoard