You see a message on the screen that tells you the disk drive’s read/write heads will remain locked until you reset the computer or turn the power off and on again. The computer locks the heads and disables the keyboard. You can now turn off the computer and prepare to move it to the new location.
The TGSHIP command should be run whenever you are going to move the main system unit. This command moves the read/write heads inside the hard disk drive to a “safety zone,” where they won’t accidentally scratch the surface of the drive platters. TGSHIP.COM is a special DOS command file included with your system. You should copy this file into the root directory of your hard disk drive.
See
Using Your Computer