CMOS SETUP
Set the reverse video cursor on the “RUN CMOS SETUP” using <Up − > and < Down ↓ > and press < ENTER >. Then the screen will be replaced by the following.
This screen is the SETUP MENU. This lists the parameters you can change with the SETUP program. A solid cursor bar highlights the parameter currently available to be changed. You can use the following key conventions.
< Enter > . . . . . . . . . . . . | . . . moves the selection bar |
< ← > < → > . . . . . . . . | . . . moves the selection bar |
< PgUp > < PgDn >. . . . . | . . scrolls allowable settings |
< E S C > . . . . . . . . . . . . . | . . . exit and save CMOS |
| register |
< Ctrl > < Alt > < Del > | . . . exit without save |
Running the Setup Program |