BACKSPACE Key

From time to time, you may make a typing error. This is not usually a problem if you correct the error before you ENTER the command. You can use the BACKSPACE key for this purpose.

Note

Occasionally, you might happen to enter the wrong command by mistake. If this incorrect command will result in the loss of data, MS-DOS will usually warn you, and give you a chance to change your mind.

The BACKSPACE key on your keyboard works just like a backspace key on a regular typewriter: it moves the cursor back one position. In addition, however, it erases the last character typed. Press the BACKSPACE key as many times as necessary to erase the typing mistake, then type out the command correctly. For instance, type the following (but do not press ENTER):

A > D R I

Press the BACKSPACE key twice to erase the I and the R.

Retype:

Then press the ENTER key. Your computer will respond by producing the directory of the disk in the A drive. Now type this:

Using MS-DOS With Your Computer 4-9