Hardware Settings

The system motherboard provides several switches to set the system configuration. These are located at various points on the board.

Note

If you have problems setting the system CPU configuration headers, contact your dealer for assistance.

When you turn the system power on, the system CPU will compare these settings with the information stored in its configuration RAM as part of the diagnostic routines. If any inconsistencies are found, they will be shown on the display monitor before MS-DOS is loaded. At that time, you will be prompted to run the SETUP program to change the options stored in the configuration PAM. It is important that these settings describe the actual equipment installed on your computer system.

B-2 System MotherBoard