Turn the door latch to open the drive.

Remove the diskette and insert it into its protective envelope .

Starting MS-DOS

To start MS-DOS 4.01 on a floppy disk-based system (that is, on without a hard disk drive), follow these steps given below. For a detailed description of how to start MS-DOS 4.01, consult the Getting Started section in your MS-DOS 4.01 User’s Guide.

Remove the MS-DOS Install diskette from its protective envelope and insert it into the A drive.

Close the disk door and turn your computer on.

Remove the Install disk and insert the Select disk.

Press ENTER.

Remove the Select disk and insert the Install disk.

Press ENTER.

The Welcome screen appears. This screen contains information about the number of disks required to install the operating system.

Press ENTER

The Introduction screen appears. This screen contains information about the function keys used to run the Select program.

4-4 Using MS-DOS With Your Computer