Kyocera FS-600 manual Setup and Connections

Chapter 1 Installing the Page Printer

Setup and Connections

Set up the printer according to the following steps.

1. Install the printer on the paper feeder. (Option) (See p.1-12)

2.Open the top cover. .................................................................................................... (See p.1-13)

3.	Install the toner container	(See p.1-14)
4.	Close the top cover	(See p.1-16)

5.Add paper. .................................................................................................................. (See p.1-16)

6.	Open the paper stopper on the face-down tray	(See p.1-19)
7.	Open the face-up output tray (when the tray is being used)	(See p.1-20)

8.Connect the printer to the computer. .......................................................................... (See p.1-21)

9.	Attach the power cord	(See p.1-23)
10.	Test the printer	(See p.1-24)
11.	Test the interface with the computer	(See p.1-25)

12.Install the printer driver. .............................................................................................. (See p.1-26)

1-11