Print Quality Problems
Printed Results | Corrective Action |
|
|
The image is smeared. | Clean the laser scanner cover glass. |
| Open the printer's top cover. Clean the laser scanner cover |
| glass using the wiper cloth. (See Chapter 4.) |
|
|
Faint or blurred printing | Check the Ecoprint setting. (See Chapter 2.) |
|
|
| If the toner indicator is flashing, install a new toner kit. (See |
| Chapter 4.) |
|
|
| Clean the laser scanner cover glass. |
| Open the printer's top cover. Clean the laser scanner cover |
| glass using the wiper cloth. (See Chapter 4.) |
|
|
| Try setting the thin paper mode. |
| Send the following PRESCRIBE IIe command from the |
| computer to set the thin paper mode. |
| !R! FRPO T9, 2; EXIT;>PRN |
| This may improve the printing quality. (To return to the |
| original setting, send the command again with “T9, 2;” |
| changed to “T9, 0;”.) |
|
|
Grey background. | Check the control panel. |
| If the toner indicator is flashing, install a new toner kit. |
| (See Chapter 4.) |
|
|
| Check the process unit. |
| Open the printer’s top cover and check that the process unit |
| is properly installed. |
|
|
(Continued on next page) | |
|
