Expanding Memory
Expanding Memory
The printer comes standard equipped with 4 MB of main memory. However, more complex pages can be printed and processing speed increased by expanding the printer's memory. There is one slot available in the printer for expanding memory. Printer memory can be expanded to up to 36 MB by installing optional extended memory chip (SIMM) in the slot.
Note______________________________________________________________________
The expansion memory should be installed only by a Kyocera authorized dealer or Kyocera certified technician. Kyocera shall not be liable for damage due to improper installation of the expansion memory.
Memory Required by the Printer Environment
It may be necessary to extend memory depending on the operating environment of the printer. Please refer to the table below for minimum memory requirements in various environments.
Printing Environment | Minimum Memory Required | ||
Resolution: 300 dpi | Resolution: 600 dpi | ||
| |||
HP LaserJet 5P (factory setting) | 4 MB | 4 MB | |
|
|
| |
HP LaserJet 5P, Resource protection | — | 10 MB | |
|
|
| |
