Kyocera KX440 Series manual Setting the phone to receive data or faxes

Setting the phone to receive data or faxes

Your phone may be able to receive certain data or faxes, depending on the system sending the information. (Note that this does not apply to PTT calls.) To receive data or faxes, you must connect the phone to a laptop or PC and switch the phone from voice mode to data/fax mode.

Note: To purchase a cable or other accessories, contact your service provider, visit www.kyocera-wireless.com/store, or call one of the customer support phone numbers listed on page xvii.

1.Connect the phone to the laptop or PC.

2.Set the Com Speed.

3.Select Menu → Settings → Network → Data/Fax Calls.

4.Press to select an option:

–Voice only—Allow only voice calls.

–Fax, next call or Data, next call—Set the phone to fax mode or data mode for the next incoming call or the next 10 minutes.

User Guide for the Kyocera KX440 PTT phone 97