LaCie user manual Connect the Power Supply, Now move on to , .2. Connect the Ethernet Cable

LaCie Network Space 2 • DESIGN BY NEIL POULTON	Connecting to a Network
User Manual	page 11

2.1.STEP 1: Connect the Power Supply

1.Connect the power supply to a wall outlet and to the LaCie Network Space 2 (Fig. 04).

Now move on to step 2, section 2.2. STEP 2: Connect the Ethernet

Cable.

CAUTION: Only use the AC adapter supplied with your specific LaCie device. Do not use a power supply from another LaCie device or another manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty. Always remove the AC adapter before transporting your LaCie drive. Failure to remove the adapter may result in damage to your drive and will void your warranty.

You may use your LaCie drive when in a foreign country thanks to its

100-240 Volt power supply. To be able to use this feature, you may Fig. 04 need to purchase an appropriate adapter or cord. LaCie accepts no responsibility for any damage to the drive resulting from the use of

an inappropriate adapter. Using an adapter other than one autho- rized by LaCie will void your warranty.