LaCie Network Space 2 • DESIGN BY NEIL POULTON | Introduction |
User Manual | page 9 |
|
|
1.3.3.LED Behavior
The front LED changes to indicate different drive behavior (Fig. 03). The following table sums up these behaviors.
LED Behavior | Indication |
Off | Drive is turned off |
Blue: Fast blinking | Drive is initializing |
Blue: Static | Drive is ready |
Blue: Flickering | Disk access |
Red: Static | Disk failure |
Red/Blue: blinking | Automatic backup in prog- |
| ress* |
TECHNICAL NOTE: Even if you have turned off the front LED us- ing the administration page (“Dashboard”, see 4.10. Dashboard: Eco Management), events triggering a red light will always cause the front LED to turn on.
•For details, refer to section 4.13.2. Auto Import of the USB Device.
Fig. 03
1.4. Power Button Functions
Switching on the drive: Turn on the drive by pressing the power but- ton on the back of the drive for two seconds. The front LED will turn on then begin blinking.
Switching off the drive: To turn off the drive, press and hold the power button for 5 seconds until the LED blinks. When the LED turns off, the drive has shut down.
NOTE: Another way to change the on/off/standby state of the Net-
work Space 2 is to use the Dashboard (see 4.5. Dashboard: Restart/
Shutdown and 4.10. Dashboard: Eco Management).
