Center/Border Erase

Center/Border Erase

This function erases the center and/or all four sides of the original image. This is useful for avoiding shadows on the copy image caused by the binding or splayed pages of books etc.

2

Two modes of this feature are available:

❖Center

This mode erases the Center margin of the original image.

❖Border

This mode erases the edges area of the original image.

Limitation

❒This function will not take effect if the size of the original cannot be detected.

Note

❒You can change the width of the erased margin as follows:

Metric version

3 – 50 mm (in 1 mm steps)

 

 

Inch version

0.1" – 2.0" (in 0.1" steps)

 

 

❒The default width of the erased margin is as follows. You can change this set- tings with the User Tools. See “Border Erase Width” ⇒ P.318 “Adjust Image” and “Centre Erase Width” ⇒ P.318 “Adjust Image”.

Metric version

10 mm

 

 

Inch version

0.4"

 

 

❒The width of the erased margin varies depending on the reproduction ratio.

❒If the size of the original is different from sizes listed in the following chart, the erased margin might be shifted.

135