What to do if Something Goes Wrong
xClearing Misfeeds
RCAUTION:
5 | • The fusing section of this equipment might be very hot. You should be very |
careful that you don't touch this section when removing the misfed paper. |
Important
❒When clearing misfeeds, do not turn off the operation switch or your copy settings will be cleared.
❒To prevent misfeeds, do not leave any torn scraps of paper within the ma- chine.
❒If paper misfeeds occur repeatedly, contact your service representative.
Note
❒More than one misfeed area may be indicated. In this case, check every appli- cable area. Refer to the following charts: A, B, C, D, U, P, R (R1 – R6), Z
❒You can find a sticker explaining how to remove misfeed paper inside of the front cover or inside of the finisher.
286