5.What to do if Something Goes Wrong

If Your Machine Does Not Operate as You Want

General

Machine Status

Problem/Cause

Action

 

 

 

The machine instructs you

The machine is warming

Wait for the machine to

to wait.

up.

warm-up.

 

 

Reference

 

 

You can use Auto Start

 

 

mode during warm-up.

 

 

See ⇒ P.70 “Auto Start”.

 

 

 

 

Copy paper is moving in

Please wait until paper has

 

tray 1 (Tandem Tray).

moved.

 

 

 

The machine cannot detect

Improper original is set.

Set non-standard size orig-

the original size.

See ⇒ P.16 “Sizes Difficult to

inals on the exposure

 

Detect”.

glass.

 

 

 

 

 

Input the both horizontal

 

 

and vertical sizes of the

 

 

non-standard original. See

 

 

⇒ P.26 “Setting Originals

 

 

on the Exposure Glass”.

 

 

 

 

 

Select paper manually. Do

 

 

not use Auto Paper Select.

 

 

 

 

 

Do not use Auto Reduce/

 

 

Enlarge.

 

 

 

 

Original is not set.

Set your originals.

 

 

 

The machine instructs you

There is no copy paper that

Set the original in the same

to check the original direc-

is the same direction as the

direction as the copy pa-

tion.

originals.

per.

 

 

 

The machine instructs you

Improper original size is

Select the proper paper

to check the paper size.

set.

size.

 

 

 

Staple mode has been reset.

The paper size was

You can only staple to-

 

changed during stapling.

gether pages of the same

 

 

size. Select copy paper of

 

 

the same size.

 

 

 

261