Basic Functions

❒You can set originals of different sizes in the document feeder at the same time. See ⇒ P.31 “Mixed Sizes Mode”.

APress the [Auto Reduce/Enlarge] key.

2

BSelect the paper tray.

Copying onto OHP Transparencies

To make copies onto OHP transparencies, you need to specify the paper type. For details, see “Tray Paper Settings” in the System Settings manual.

AOpen designated OHP tray (Tray2-6).

BLightly insert the OHP transparencies face up.

Note

❒If you would like slip sheets (blank or copied) between your OHP trans- parencies, see ⇒ P.163 “Slip Sheets”.

❒You cannot set the OHP transparencies into the Tandem Tray or optional A3/11" × 17 " Tray Kit.

❒To avoid paper misfeeds, fan the OHP transparencies before setting it in the tray.

CSelect the paper tray in which OHP transparencies are loaded.

DSet your originals then press the {Start}key.

Important

❒When copying onto OHP transparencies, remove copied sheets one by one.

41