What to do if Something Goes Wrong

If You Cannot Make Copies As You Want

Problem

Cause

Action

 

 

 

Copies are not stapled.

There are jammed staples

Remove jammed staples.

 

in the stapler.

See ⇒ P.302 “e Removing

 

 

Jammed Staples”.

 

 

 

 

Note

 

 

 

 

After removing

 

 

 

 

jammed staples, staples

 

 

 

 

might not eject proper-

 

 

 

 

ly the first few times

 

 

 

 

you try to use the sta-

 

 

 

 

pler.

 

 

 

 

 

 

 

 

The number of copies ex-

Check the stapler capacity.

 

 

 

ceeds the capacity of the

See ⇒ P.49 “Staple”.

5

 

 

stapler.

 

 

 

 

 

 

 

 

Staples are wrongly posi-

Originals are not set cor-

Set originals correctly. See

 

 

tioned.

rectly.

⇒ P.49 “Staple”.

 

 

 

 

 

 

 

Misfeeds occur frequently.

The copy paper size setting

Set the proper paper size.

 

 

 

is not correct.

See ⇒ P.294 “Changing the

 

 

 

 

Paper Size”.

 

 

 

 

 

 

 

 

 

Make sure the back fence

 

 

 

 

in the paper tray is set cor-

 

 

 

 

rectly.

 

 

 

 

 

 

 

You cannot combine sever-

Selected functions cannot

Refer to the combination

 

 

al functions.

be used together.

chart. See ⇒ P.193 “Combi-

 

 

 

 

nation Chart”.

 

 

 

 

 

 

 

When sorting the pages are

Memory ran out during

You can interrupt copying

 

 

divided into two blocks.

sorting and the pages were

when memory runs out.

 

 

 

ejected in two blocks.

See “Memory Full Auto

 

 

 

 

Scan Restart” ⇒ P.328 “In-

 

 

 

 

put/Output”.

 

 

 

 

 

 

 

 

 

 

 

 

Adjust Image

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Problem

Cause

Action

 

 

 

 

 

 

 

In Double Copies mode,

The original and copy pa-

Select the proper original

 

 

parts of the original image

per do not match.

and copy paper. See

 

 

are not copied.

 

P.143 “Double Copies”.

 

 

 

 

 

272