Setting Originals

BSet the first page of your original face down on the exposure glass and align it to the rear left corner.

1

2

2

ND1C01EE

1:Reference mark

2:Scale

CLower the document feeder.

Setting Originals in the Document Feeder

Note

❒The last page should be on the bottom.

❒Do not stack originals beyond the limit mark on the side fence of the docu- ment feeder.

❒When copying thin originals (40 – 52 g/m2, 11 – 14 lb, Bond), set one page at a time in the document feeder or on the exposure glass to avoid damage due to multi-sheet feeds (several pages fed together at the same time).

❒Originals in pencil or other similar media may get slightly smudged after be- ing scanned through the ARDF. To avoid this, you can set them on the expo- sure glass instead.

❒As a rule, one-sided originals are delivered to the ARDF external tray, and two-sided originals to the ARDF tray.

Reference

For originals that the document feeder can handle, see ⇒ P.15 “Originals”.

To set a stack of originals in the document feeder

AAdjust the guide to the original size.

27